From: R. Duwane Squires (squires@wvwc.edu)
Date: Fri Aug 06 2004 - 08:49:19 CDT
I have setup NetReg and it seems to be working fine. However, being
relatively new to Linux, I wanted to make sure I have the network setup
correct.
Here is my setup:
We have a firewall in place running NAT so my Valid address range is
anything in the 10.0.0.0 class A range. The bogus range that I am using is
the 192.168.1.0 class C range.
I have on NIC in the NetReg server. Eth0 is setup up with the address of
10.0.0.112, a netmask of 255.0.0.0, and the gateway is 10.0.0.1 (our
firewall). Eth0:1 is a virtual network set up as 192.168.1.1, with a
netmask of 255.255.255.0 and the gateway points to itself 192.168.1.1.
I have not seen much on the list concerning the NIC setup and wanted to know
our setup is typical.
--------
R. Duwane Squires
CIO
West Virginia Wesleyan College
Buckhannon, WV 26201
squires@wvwc.edu
NTMail K12 - the Mail Server for Education
**********************************************************************
To unsubscribe from this list, send an e-mail message to
majordomo@southwestern.edu containing a single line with the words:
unsubscribe netreg
Send requests for assistance to: owner-netreg@southwestern.edu
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Aug 12 2004 - 12:01:47 CDT